3kbp005m thru 3kbp08m document number 88888 08-jul-05 vishay general semiconductor www.vishay.com 1 case style kbpm ~ ~ ~ ~ new product glass passivated single-phase bridge rectifier major ratings and characteristics i f(av) 3 a v rrm 50 v to 800 v i fsm 80 a i r 5 a v f 1.05 v t j max. 150 c features ul recognition file number e54214 ideal for printed circuit board high surge current capability high case dielectric strength solder dip 260 c, 40 seconds typical applications general purpose use in ac-to-dc bridge full wave rec- tification for switching power supply, home appli- ances, office equipment, and telecommunication applications mechanical data case: kbpm epoxy meets ul-94v-0 flammability rating terminals: silver plated (e4 suffix) leads, solderable per j-std-002b and jesd22-b102d polarity: as marked on body maximum ratings ratings at 25 c ambient temper ature unless otherwise specified. parameter symbols 3kbp 005m 3kbp 01m 3kbp 02m 3kbp 04m 3kbp 06m 3kbp 08m units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 v maximum rms voltage v rms 35 70 140 280 420 560 v maximum dc blocking voltage v dc 50 100 200 400 600 800 v maximum average forward output rectified current at t a = 55 c (fig. 1) i f(av) 3.0 a peak forward surge current 50 hz single half sine-wave superimposed on rated load i fsm 80 a rating for fusing (t < 10 ms) i 2 t 32 a 2 sec operating junction and storage temperature range t j , t stg - 55 to + 150 c
www.vishay.com 2 document number 88888 08-jul-05 3kbp005m thru 3kbp08m vishay general semiconductor electrical characteristics ratings at 25 c ambient temper ature unless other wise specified. thermal characteristics ratings at 25 c ambient temper ature unless other wise specified. notes: (1) thermal resistance from junction to am bient and from junction to lead mounted on p. c.b. with, 0.47 x 0.47" (12 x12 mm) copp er pads. ratings and characteristics curves (t a = 25 c unless otherwise noted) parameter test condition symbols 3kbp 005m 3kbp 01m 3kbp 02m 3kbp 04m 3kbp 06m 3kbp 08m units maximum instantaneous forward voltage drop per leg at 3.0 a v f 1.05 v maximum dc reverse current at rated dc blocking voltage per leg t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per leg at 4.0 v, 1 mhz c j 25 pf parameter symbols 3kbp 005m 3kbp 01m 3kbp 02m 3kbp 04m 3kbp 06m 3kbp 08m units typical thermal resistance per leg (1) r ja r jl 30 11 c/w figure 1. forward current derating curve ta - ambient temperature (c) average forward current (a) 0 20 40 60 80 100 120 140 160 0 1 2 3 4 with heat sink without heat sink 60 h z resistive or induction load heat sink mounting: 3.0 x 3.0 x 0.11 thick (7.5 x 7.5 x 0.3 cm) al. plate figure 2. maximum non-repetitive peak forward surge current per leg number of cycles at 60 h z peak forward surge current (a) 1 10 100 0 20 40 60 80 100
3kbp005m thru 3kbp08m document number 88888 08-jul-05 vishay general semiconductor www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical forward characteristics per leg figure 4. typical reverse leak age characteristics per leg instantaneous forward voltage (v) instantaneous forward current (a) 0.5 0.4 0.6 0.8 1.0 1.2 1.1 0.01 0.1 1 10 0.7 0.9 tj=25c tj=150c tj = 125c percent of rated peak reverse voltage (%) instantaneous reverse current (a) 10 20 40 60 80 100 0.01 0.1 1 10 100 30 50 70 90 t j = 125c t j = 150c t j =25c figure 5. typical junc tion capacitance per leg reverse voltage (v) junction capacitance (pf) 0.1 1 10 100 1 10 100 t j =25c f = 1.0 mh z vsig = 50mvp-p 0.125 x 45 o (3.2) 0.600 (15.24) 0.560 (14.22) 0.034 (0.86) 0.028 (0.76) 0.105 (2.67) 0.085 (2.16) 0.160 (4.1) 0.140 (3.6) 0.060 (1.52) polarity shown on front side of case: positive lead by beveled corner 0.460 (11.68) 0.50 (12.7) min. 0.420 (10.67) 0.500 (12.70) 0.460 (11.68) 60 (15.2) min. dia. 0.200 (5.08) 0.180 (4.57) case style kbpm
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
